Hosting a session
Start a session, let phones in, and manage who is there.
The host's phone runs the session. It lets phones in, keeps everyone's clocks in step, and ends up holding every recording.
Start a session

- On the home screen, tap Start a session.
- Type a Session name if you like, and choose whether the session is open or closed — see below.
- Tap Start.
To skip the choices and host the moment you tap, set Settings › Quick start › Start to Start straight away. The ⋯ button in the tile's corner still opens the choices.
The lobby shows a QR code and a six-character join code. Other phones use either one to join — see Joining a session.

Open or closed

- Closed, the default: only phones with the code or the QR code can join.
- Open: the session also appears under Open sessions nearby when a nearby phone taps Join a session, and it can join with a tap.
Switch with Open session — when you start the session, or in the lobby at any time. Phones already in the session stay in it either way.
No Wi-Fi network? Share your hotspot
Phones usually connect in a second or two, at the first try, whether they share a Wi-Fi network or not: with no network to join, they find each other over Wi-Fi directly, so a field works as long as Wi-Fi is switched on. If a phone keeps failing to connect directly, and there's no network to share, the host's own Personal Hotspot is one the phones can use:
- Turn on Settings › Personal Hotspot on the host's phone, and leave its screen on.
- In the lobby, tap Share over my hotspot and type the network's name and password. iOS doesn't tell an app either of them, which is why you type them.
- Choose whether the password goes into the QR code. With it in, a scanning phone joins the network by itself; with it out, the code names the network and iOS asks each phone for the password — read it out.
- Everyone scans as usual. A phone that isn't on the network offers to join it, iOS asks that phone to confirm, and it goes on into the session.
Nothing goes over cellular. The session runs between the phones across that network, and the cellular side of the hotspot isn't used at all. Phones already in the session aren't affected by turning sharing on or off.
Anyone who can see the host's screen can read the QR code, so treat sharing the password the way you'd treat reading it out in the room.
Before everyone spreads out
Every phone talks to the host, so it's the host's phone that has to be within reach of all the others. The lobby's Spreading out section says what to do before the phones move away:
- Put the host in the middle of the group, not at one end, with a clear view of the others — on a stand or a chair rather than in a pocket.
- Keep phones out of pockets and away from bodies. People and walls soak up Wi-Fi: a phone behind a player reaches much less far than one in the open.
- Use a Wi-Fi network if there is one that covers the whole space — the hall's, or a small travel router set down in the middle. It reaches further than phones reach each other. Join every phone to it before they join the session. The host's Personal Hotspot doesn't add range: it's still the host's phone the others have to reach.
A phone that can't reach the host, but can reach another phone that can, links through that phone. Its tile says via and that phone's name. Each phone passes messages on for up to two others, one step only: a phone linked through another doesn't pass messages on itself. While it's linked that way it keeps trying the host, and goes back to it directly as soon as it can. Its recordings wait until it's in reach of the host, or the next session — they don't go through the other phone.
A phone that goes out of range keeps recording and comes back by itself when it can — see If a phone loses the host.
How many phones
A session holds up to eight phones, including the host. That is the most iPhones can connect together this way. A host on the free version takes two; see Free and Full.
- Up to … phones, in the lobby, sets a lower limit.
- Full — no more phones stops anyone new from joining, however many phones are there.
A phone that is turned away is told the session is full. Phones already in stay, and a phone that drops out keeps its place.
Remove a phone
Tap Hand over or remove phones under the list of phones — in the lobby, or on the recording screen between takes — then tap the phone and Remove from the session. Quicker: touch and hold a phone — its row in the lobby, its tile on the recording screen between takes, or its row on the phones page — and choose Remove from the session. In the lobby you can also swipe left on a phone and tap Remove.
It leaves the session and can't rejoin that session, even with the code. Anything it has already recorded stays on that phone, and the host stops waiting for it when collecting.
Phones can be removed in the lobby or between takes, not during calibration, a take, or collecting.
Hand the session to another phone
If your battery is running low, or you have to leave, another phone can take over as host. Tap Hand over or remove phones, tap the phone, then Make … the host — or touch and hold the phone wherever it is shown and choose the same thing. End offers the same thing as Hand over to another phone.
The other phone runs the session from then on: it starts and stops the takes, and collects everyone's recordings. The session keeps its code, its takes and its calibration, and nobody has to huddle again. Your phone stays in the session as an ordinary phone, and every phone says who the host is now.
You can hand over in the lobby, between takes, or while collecting — not during a take or a sweep. The other phone has to be connected.
What moves at once is the session's record: the takes, who recorded what, and the names. The recordings themselves are collected again by the new host from the phones that made them, yours included. If you can, keep your phone on and nearby until it has your takes. If it switches off first, its takes stay on it and are listed under Takes still to send the next time it joins a session hosted by that phone.
If the other phone doesn't take over within fifteen seconds, your phone says so and stays the host, so you can try another.
The primary phone
The primary phone plays the calibration sweep. It is the host unless you change it: in the lobby, swipe left on a phone and tap Primary. If the primary phone is removed, the host takes over. Handing the session over doesn't move the primary: the phone that plays the sweep stays where it is.
End the session
Tap End at the top of the screen at any time. StakdTrax asks first. A take in progress is stopped and kept, and every other phone is told the session has ended.
Finish, after collecting, is different: the other phones wait for the stack, and go home once it reaches them — see Everyone gets the stack.
Ended it by mistake?
For fifteen minutes afterwards, your home screen shows Session ended with Resume the session. Resuming picks it up where it stopped — the same code, the same takes, the same calibration — and puts it back on the air. A take that was recording is not restarted; you're ready to record the next one. If you ended it during calibration, you're back in the lobby to huddle again.
The other phones come back the way they would after losing touch, and take up their old places. Each one has to tap Rejoin when the host resumes it on its home screen first — see Joining a session.
Resuming only works while StakdTrax stays open on your phone; quitting it lets the ended session go. Nothing recorded is lost either way.